NOYES CS260-20 CALIBRATION and NOYES CS260-20 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NOYES CS260-20 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   NOYES CS260-20   Description / Specification:    
NOYES CS260-20 Metro/Access OTDR

The NOYES CS260-20 Contractor Series Metro/Access OTDR is a dual-wavelength, 1310/1550 nm OTDR for troubleshooting point-to-point metro/access optical networks up to 60 km (40 miles) in length. The CS260-20 provides extremely short event and attenuation dead zones (0.8 and 3.5 m, respectively), enabling closely spaced events to be individually resolved and measured in short access networks. To further aid in locating faults within access points, splice closures or indoor cabling, the CS260-20 includes an integrated Visual Fault Locator (VFL, a visible red laser). Intended for single-mode optical network installation verification and troubleshooting, the CS260-20 is extremely easy to use. It provides fully automatic OTDR parameter selection, automatic event table generation and end-to-end length, loss and optical return loss (ORL) summary. For expert users, the CS260-20 also allows full control of OTDR parameters (range, pulse width, averaging time, etc.). OTDR Specifications. Emitter Type: Laser. Center Wavelengths: 1310/1550 nm ±20 nm. Dynamic Range (SNR = 1): 30/30 dB. Event Dead Zone: 0.8 m. Attenuation Dead Zone: 3.5 m. Pulse Widths: 5, 10, 30, 100, 300 ns, 1, 3, 10 ?s. Range Settings: 250 m to 240 km. Data Point Spacing: 5.0 cm (range <1.5 km), Range/30,000 (range >1.5 km). Group Index of Refraction (GIR): 1.4000 to 1.6000. Distance Uncertainty: ±(1 + 0.005 % x distance + data point spacing). Linearity: ±0.05 dB/dB VFL Specifications. Wavelength: 650 nm ±20 nm. Output Power (nominal): 0.8 mW into single-mode fiber.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NOYES CS260-20. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your NOYES CS260-20 CALIBRATION and/or NOYES CS260-20 Metro/Access OTDR REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: